4130 Forged Steel Round Bar Export to Italy
--18th.September.2023--
24.7 Tons 4130 forged steek round bar loaded in a full 20ft container, ready for shipping to port Genoa,Italy.
4130 steel (also known as AISI 4130 and SAE 4130) is a chromium molybdenum low alloy steel with much higher strength and toughness than typical steel grades. In addition, the carbon content of this alloy is reduced while limiting the thickness strength, providing better weldability than its 4140 steel counterpart. These characteristics make AISI 4130 a popular choice in the aerospace industry for manufacturing commercial and military aircraft components that require high strength and low weight. Examples include gears, piston pins, etc. Other uses of 4130 steel include automotive parts, cutting tools, and drilling and mining machinery.
C : {{0}}. 28 – 0. 33 percent
Mn: {{0}}. 40 – 0. 60 percent
P: 0.035 percent max
S: 0.040 percent max
Si: 0. 2 –. 35 percent
Cr: 0. 8-1.10 percent
Mo: {{0}}. 15 – 0. 25 percent
① The user requires Si Less than or equal to {{0}}.10 percent . When used for certain cold formed components, Si Less than or equal to 0.10 percent should be selected.
③ When the steel contains {{0}}.15 percent to 0.35 percent Pb, add the letter "L" between the second and third digits of the steel grade, such as 41L40. When lead Pb is added to the ladle, no thermal analysis is performed.
4130 alloy steel is usually used in a quenched and tempered state, and steel with a lower carbon content can also be used as carburized steel with higher core strength requirements. In the medium-sized machinery manufacturing industry, it is mainly used to manufacture quenched and tempered parts with large cross-sections that work under high stress conditions, such as shafts, spindles, and control wheels, bolts, double head bolts, gears, etc. under high loads; Used in the chemical industry to manufacture welded parts, welded structures composed of plates and pipes, and high-pressure conduits with a temperature not exceeding 250 degree working in a medium containing nitrogen and hydrogen; In the manufacturing industry of steam turbines and boilers, it is used to manufacture fasteners for work below 450 degree , flanges and flange covers under high pressure below 500 degree .
